Lorex B241AJ Serie Guide De Démarrage Rapide page 19

Connect the doorbell
9
To attach the doorbell to the bracket:
1. Push the wiring back into the wall.
2. Insert the two tabs from the mounting bracket into the doorbell (see Figure 1).
3. Press the doorbell downwards. A *click* sound will indicate that it is locked in.
Figure 1
B451AJ_QSG_TRILINGUAL_R1.indd 19 B451AJ_QSG_TRILINGUAL_R1.indd 19
Note - If you need to remove the doorbell from
the bracket:
1. Insert the supplied pin into the hole at the
bottom of the mounting bracket until the
inner buckle is reached (see Figure 2).
2. Then slide the doorbell up and remove it.
Figure 2
2021-03-10 1:01:03 PM 2021-03-10 1:01:03 PM