Lorex B241AJ Serie Guide De Démarrage Rapide page 17

Wiring the doorbell
8
To wire the doorbell:
1. Loosen the power port screws of the
doorbell with a Philips-head screwdriver.
Note: Do not fully remove the
power port screws.
2. Loop the power wires underneath the
power port screws (see Figure 1).
3. Tighten the power port screws to secure
the power wires (see Figure 2).
B451AJ_QSG_TRILINGUAL_R1.indd 17 B451AJ_QSG_TRILINGUAL_R1.indd 17
Figure 1
Figure 2
2021-03-10 1:00:57 PM 2021-03-10 1:00:57 PM