Publicité
Les langues disponibles
Les langues disponibles
Forward
1
Forward
5. Position the brackets under the bed , at the four attachment locations and align with the 5/8" drilled
holes in the bed. See Illustration "A" and "C" for details on bracket location.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information/ Tech Support.
2020 Keystone Automotive Operations Inc. All Rights Reserved. 09/21/2020-Rev4
22"
Use the 1
from the end of the
base rail to drill hole
for 5/8" bolt in both
rail locations.
Use the 1
from the end of the
base rail to drill hole
for 5/8" bolt in both
rail locations.
TRUCK BED
DRILLED
HOLE 2 IN
HOLE 1 &
FRAME &
WHEEL BOLT
CARRIAGE BOLT
Illustration "C"
st
slot
st
slot
DRILLED
HOLE 3,4 &
WHEEL BOLT
DRIVER SIDE SHOWN
(10 Bolt Base Rails #30686)
29-7/8" 6'-6" & 8' Box
(4 Bolt Base Rails #31323)
30-5/16" 6'-6" & 8' Box
Diagonal
measurements must
be the same both
directions as shown.
Rear edge of truck bed
Illustration "B"
3
TRUCK
FRAME
Page-4
Publicité
