Audi 8T0 055 202 A Notice De Montage page 11

Check operation
14. Reconnect the vehicle battery.
15. Adjusting the coding: The AM code required can be found in the "coding supplement" on the
Audi dealer portals (including ServiceNet).
Connect a suitable vehicle diagnostic, testing and information system to the vehicle via an
-
online connection, e.g. the vehicle diagnostic, testing and information system -VAS
5051B-.
Select [Functions and Components] ([Funktions und Bauteilauswahl]).
-
Select the "Direct input of AM code for vehicle alteration" ("Direkteingabe AM-Code
-
für Fahrzeugumbau") testing programme from within Action Management (AM).
When prompted, enter the corresponding code.
-
16. Secure all cables with cable ties.
17. Replace all parts removed.
Audi A4/A5
Call up the fault memory of all control units and delete the
-
" Undervoltage" (" Unterspannung" ) fault as necessary.
Test towing functions using a suitable tester (with load resistors) or a
-
trailer.
WESTFALIA-Automotive GmbH 305 211 391 103 - 003 - 28/12 11