Publicité
Les langues disponibles
Les langues disponibles
27. Keep your work area well dry.
28. Do not use the cleaner to clean your pets or any animal.
29. When using and you hear a squeaking sound from the vacuum cleaner, or suction power appears to be
reduced, stop the machine immediately and clean all filters and change the dust bag.
30. WARNING: Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.
31. Tip: By reducing the suction power you can move the floor brush easier on the floor. Set the suction power
to minimal for furniture, to medium for carpet and hard floors. Only use the maximum setting on hard
floors in combination with a brush for hard floors.
The general purpose vacuum cleaner (model VE-112682.11), has been tested according to EN 60312-1 and
complies with the essential requirements of regulation (EU) 666/2013 for vacuum cleaners.
PARTS AND ACCESSORIES
1.
On/off switch pedal
2.
Speed control button
3.
Cord rewinder pedal
4.
Dust full indicator
5.
Hose
6.
Metal telescopic tube
7.
Hose connector
8.
Combi nozzle
9.
Locking clip of front cover
10. Floor brush
OPERATING MODE
1.
Connect the hose accessories:
Press the adaptors at both side of the hose end, and then insert the hose into the hose socket.
2.
Connect the extension tube to the curved hose end.
Connect the different nozzle tools/floor brush to the tube for different cleaning purposes. The floorbrush
has two positions, one for hard/even and one for soft/textile surfaces – Choose the right one.
3.
Turn on the appliance:
Hold the plug and pull out the cord, then insert the plug into the power socket. Make sure that the power
supply corresponds to the required power mentioned on the rating label.
Press the on/off switch pedal to turn on the power. Adjust the power to the required level depending on
the cleaning function.
4.
Turn off the appliance:
After using, press the on/off switch pedal, the appliance is turned off. Pull the plug out of the power
socket; press the cord rewind pedal, the power cord will be drawn in.
5.
To move the appliance from room to room, unplug and carry it by using the handle. Never pull the
appliance by its cord when moving.
6.
Tip: By reducing the suction power you can move the floor brush easier on the floor. Set the suction
power to minimal for furniture, to medium for carpet and hard floors. Only use the maximum setting on
hard floors in combination with a brush for hard floors.
MAINTENANCE
When the dust full indicator turns to red, it is time to clean the dust bag or replace with a new bag. To do that,
please follow the instructions:
- 3 -
Publicité
