Simons Voss Technologies NW50.900100 Guide Abrégé page 18

2. Installation
until the noses engage).
The battery/installation key must lie flat on the inside of the
thumb-turn.
1
2. Hold the thumb-turn firmly and turn the battery/installa-
tion key clockwise about 30°.
The locking disc will click.
9
3. Push the recessed grip inwards.
4. Turn the thumb-turn cover counterclockwise until it
stops.
5. Remove the thumb-turn cover.
6. Attach the thumb-turn cover with the LockNode as
shown.
2
7. Turn the thumb-turn cover clockwise until it stops.
Cylinder beeps four times.
9
8. Pull the recessed grip outwards until it is flush with the
thumb-turn cover.
NOTE
18 / 68 | EN