Télécharger Imprimer la page

Whirlpool Cabrio Serie Guide D'utilisation Et D'entretien page 2

Publicité

Les langues disponibles

Les langues disponibles

DRYER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously
injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING
- ...i.. ofFi,o..
- Clothes
dryer
installation
must be performed
by a qualified
installer.
- install the clothes
dryer according
to the manufacturer's
instructions
and local codes.
- Do not install
a clothes
dryer with flexible
plastic venting materials
or flexible
metal
(foil type) duct,
if flexible
metal
duct is installed,
it must be of a specific
type identified
by the appliance
manufacturer
as suitable for use with clothes
dryers.
Flexible
venting
materials
are known
to collapse,
be easily crushed,
and trap
lint. These
conditions
will
obstruct
clothes
dryer airflow
and increase
the risk of fire.
- To reduce
the risk of severe injury or death, follow
all installation
instructions.
- Save these
instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
in the State of Massachusetts,
the following installation instructions apply:
I Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
the State of Massachusetts.
I If using a ball valve, it shall be a T-handle type.
m A flexible gas connector, when used, must not exceed 3 feet.
iMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54 or the Canadian Natural Gas and Propane Installation Code, CSA B149.1.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.
2

Publicité

loading