Publicité
Les langues disponibles
Les langues disponibles
The high pressures created by a pressure washer can cause fluid injection injuries,
severe lacerations, amputations, and / or death. To avoid these hazards, always aim
the spray gun and lance in a safe direction when using the pressure washer and never
attempt to touch a leak in a high-pressure hose or fitting.
This product has many parts that move at high speeds. Moving parts can cause crushing
injuries, broken bones, severe lacerations, and/or traumatic amputations. To prevent
injury, never place fingers, hands, feet, or other body parts near the running motor. Never
operate product with covers, shrouds, or other guards removed. Do not wear loose-fitting
clothing, dangling drawstrings, or any other hanging items that could become entangled
in moving parts while operating. Tie up long hair and remove jewelry before operating.
STARTING THE PRESSURE WASHER
1. Connect the hoses as instructed on Page 9.
2. Turn on the water and purge the system of air as instructed on Page 10.
3. Insert the desired nozzle as instructed on Page 11.
4. Make sure the master ON/OFF switch is in the OFF position.
5.
Plug the electrical power cord into a grounded 5-15R receptacle, that was properly
installed in accordance with all local codes and ordinances.
Page 13
WARNING:
WARNING:
WARNING:
WARNING:
INJECTION INJURY
MOVING PARTS
Publicité
