Nakayama MB5005 Mode D'emploi page 2

EN
SPECIFICATIONS
Technical Data
Model MB5005
Engine type OHV
Power 4 hp
Displacement 139 cc
Working width 36/60 cm (4/6 blades)
Max. working depth 260 mm
Depth adjustment 3 positions
Housing material Steel
Wheel size 6''
2
Fig. 1
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and safety
of the products. The parts described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or
replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
WWW.NIKOLAOUTOOLS.GR
1. Carriage
2. Left-hand handle (driving lever)
3. Driving lever
4. Depth limiter
5. Bracket and handle
6. Wheel
7. Right-hand handle (ON/OFF, SPEED)