Sony Cyber-shot DSC-RX1002 Mode D'emploi page 18

Setting the clock
1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you turn on the camera for the first
time.
• It may take time for the power to turn on and allow operation.
2
Check that [Enter] is selected on the screen, then press
z on the control wheel.
3
Select a desired geographic location by following the
on-screen instructions, then press z.
4
Set [Daylight Svg.:], date and [Date Format:], then
press z.
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Check that [Enter] is selected, then press z.
GB
18
ON/OFF (Power)
Power/Charge lamp (green)
Control wheel
Select items:
Set the numeric value of date and
time: / / /
v V
Set:
z
/
b B