Comfort Climate - Ravelli HR 160 SNELLA PLUS Manuel D'utilisation Et D'entretien

From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
To access the COMFORT CLIMATE MENU, press key 2 five times and confirm with OK. To change the settings, use the keys 1 and
To access the COMFORT CLIMATE MENU, press key 2 five times and confirm with OK. To change the settings, use the keys 1 and
2 and with each OK pressed the data is confirmed and you pass to the next step.
2 and with each OK pressed the data is confirmed and you pass to the next step.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice. In the second screen, it is possible to choose which management (air/water) is linked to this function (see par. 8.2)
In the second screen, it is possible to choose which management (air/water) is linked to this function (see par. 8.2)
From the status of Fig. 15-A to access the USER MENU press the OK button twice.
On last confirmation with OK, the settings are saved and you automatically return to the icons screen.
To access the COMFORT CLIMATE MENU, press key 2 five times and confirm with OK. To change the settings, use the keys 1 and
On last confirmation with OK, the settings are saved and you automatically return to the icons screen.
To access the COMFORT CLIMATE MENU, press key 2 five times and confirm with OK. To change the settings, use the keys 1 and
To return to the initial screen, simultaneously press keys 1 and 2.
2 and with each OK pressed the data is confirmed and you pass to the next step.
To return to the initial screen, simultaneously press keys 1 and 2.
2 and with each OK pressed the data is confirmed and you pass to the next step.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
In the second screen, it is possible to choose which management (air/water) is linked to this function (see par. 8.2)
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
In the second screen, it is possible to choose which management (air/water) is linked to this function
On last confirmation with OK, the settings are saved and you automatically return to the icons screen.
On last confirmation with OK, the settings are saved and you automatically return to the icons screen.
To return to the initial screen, simultaneously press keys 1 and 2.
7.3.7 "SEASON" mode
7.3.7 "SEASON" mode
To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
The season mode is used mainly to manage advanced layouts in the presence of a circuit with sanitary water accumulation (boiler).
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button. The season mode is used mainly to manage advanced layouts in the presence of a circuit with sanitary water accumulation (boiler).
In the BASIC hydraulic circuit, the SUMMER setting is not active.
In the BASIC hydraulic circuit, the SUMMER setting is not active.
7.3.7 "SEASON" mode
"SEASON" mode
The season mode is used mainly to manage advanced layouts in the presence of a circuit with sanitary water accumulation (boiler).
The season mode is used mainly to manage advanced layouts in the presence of a circuit with sanitary water accumulation (boiler).
In the BASIC hydraulic circuit, the SUMMER setting is not active.
In the BASIC hydraulic circuit, the SUMMER setting is not active.
Winter/Summer
Winter/Summer
Winter/Summer
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
To access the SEASON MODE, press key 2 six times. Enable or disable the function using the OK key.
To access the SEASON MODE, press key 2 six times. Enable or disable the function using the OK key.
To return to the initial screen, simultaneously press keys 1 and 2.
From the status of Fig. 15-A to access the USER MENU press the OK button twice. To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
To access the SEASON MODE, press key 2 six times. Enable or disable the function using the OK key. Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
To access the SEASON MODE, press key 2 six times. Enable or disable the function using the OK key.
To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button. To return to the initial screen, simultaneously press keys 1 and 2.
7.3.8 "VENTILATION" menu
7.3.8 "VENTILATION" menu
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
"VENTILATION" menu
7.3.8 "VENTILATION" menu
Set room ventil.
Set room ventil.
Set room ventil.
From the status of Fig. 15-A to access the USER MENU press the OK button twice.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
To access the VENTILATION MENU press key 2 seven times and confirm with OK.
To access the VENTILATION MENU press key 2 seven times and confirm with OK.
To access the VENTILATION MENU press key 2 seven times and confirm with OK.
To select the function type use keys 1 and 2 and confirm with the OK key.
To select the function type use keys 1 and 2 and confirm with the OK key.
To select the function type use keys 1 and 2 and confirm with the OK key.
From the status of Fig. 15-A (par.7.2) to access the USER MENU press the OK button twice.
To access the VENTILATION MENU press key 2 seven times and confirm with OK.
To select the function type use keys 1 and 2 and confirm with the OK key.
Set Room
Set Room
Temp.
Temp.
Console Probe
Console Probe
Set Room
Temp.
Console Probe
Select Power
Select Power
Select Power
To return to the initial screen, simultaneously press keys 1 and 2.
To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
To return to the initial screen, simultaneously press keys 1 and 2.
Alternatively, it is possible to exit the menu in steps by each time pressing the OK button.
User and Maintenance Manual HYDRO models
User and Maintenance Manual HYDRO models
User and Maintenance Manual HYDRO models
Use and maintenance manual
Fig.27-A
Fig.27-A
Fig.27-A
Fig.28
Fig.28
Fig.28
SET ROOM TEMPERATURE:
SET ROOM TEMPERATURE:
With ventilation active, the setting of the room function manages modulation
With ventilation active, the setting of the room function manages modulation
exclusively with the air exchanger. Also in this case, the reading of the probe can be activated on
exclusively with the air exchanger. Also in this case, the reading of the probe can be activated on
the display if this is installed on the wall.
the display if this is installed on the wall.
SET ROOM TEMPERATURE:
With ventilation active, the setting of the room function manages modulation
With key 1 and 2, set the desired room setting and confirm with the OK key;
With key 1 and 2, set the desired room setting and confirm with the OK key;
exclusively with the air exchanger. Also in this case, the reading of the probe can be activated on
Activate or deactivate reading of the probe via key 1 and 2 and confirm with OK to return to the
Activate or deactivate reading of the probe via key 1 and 2 and confirm with OK to return to the
the display if this is installed on the wall.
ventilation screen.
ventilation screen.
Fig.29-A
With key 1 and 2, set the desired room setting and confirm with the OK key;
Fig.29-A
Activate or deactivate reading of the probe via key 1 and 2 and confirm with OK to return to the
ventilation screen.
FAN POWER SELECTION:
FAN POWER SELECTION:
With ventilation active, it is possible to set the power of the room exchanger
Fig.29-A
With ventilation active, it is possible to set the power of the room exchanger
fan; it is also possible to deactivate it bringing the speed bar to 0.
fan; it is also possible to deactivate it bringing the speed bar to 0.
With key 1 and 2, set fan power among the 4 options:
FAN POWER SELECTION:
With key 1 and 2, set fan power among the 4 options:
With ventilation active, it is possible to set the power of the room exchanger
fan; it is also possible to deactivate it bringing the speed bar to 0.
Confirm the power selected with the OK key to return to the ventilation screen
Confirm the power selected with the OK key to return to the ventilation screen
Fig.29-B
With key 1 and 2, set fan power among the 4 options:
Fig.29-B
Confirm the power selected with the OK key to return to the ventilation screen
Fig.29-B
HR 160 SNELLA PLUS
Winter/Summer
Winter/Summer
Winter/Summer
OFF MIN MED MAX
OFF MIN MED MAX
OFF MIN MED MAX
Page 22 Page 22
Rev.1 26/03/2018 15/06/11
Page 22
Page 67
EN
Fig.27-B
Fig.27-B
Fig.27-B