Description Of Functions; Modulation; Comfort Climate - Ravelli HIdro line Manuel D'utilisation Et D'entretien

7.3.10 "SEE CALIBRATION" menu
Fig.31
Switch on
Flame Present
Grate Cleaning
Switch off
Menu
7.3.11 "SEE WORKING HOURS" menu
Fig.32
Counter
Total Hours
7.3.12 "SET AIR/PELLETS" menu
Fig.33
Pellets
Flow
return to the icons screen.
N.B.: the number indicated during the change of parameters refers only
to a percentage value that acts on the default parameters set on the elec-
tronic board (e clusively in the working phase). These values should be
changed in the event of poor combustion, due in many cases to the pur-
chase of pellets differing from those used during stove inspection.
7.3.13 "LANGUAGE" menu
Fig.34
Select Language
Italian
German
English
Pag.28
the parameters set in the electronic con-
derstand which parameters are set on
the machine and therefore identify the
partial hours and number of switch
automatically return to the icon screen.
version HYDRO 2.00)
Fig.35
-
System Layout
-
-
accumulator for heating systems, the boiler to mange water destined for
sanitary use. For further information view the speci c booklet on system
layout.

8. DESCRIPTION OF FUNCTIONS

8.1. Modulation

consumption is minimal.
AIR MODULATION:
WATER MODULATION:
lator remains on because the set room may not be
WORKING MODULATION:

8.2. Comfort climate

8.2.1 "Air" comfort climate
-
EXAMPLE:
-
Fig.36A
Comfort Climate
C. Climate Delay
-
Fig.36B
Comfort Climate
C. Climate Delay
Fig.36C
8.2.2 "Water" comfort climate
-
to the type of hydraulic system installed in
LAYOUT 0
LAYOUT 1
LAYOUT 2
LAYOUT 3
n.b. the puffer is used by the water
Comfort Climate function.
room temperature reaches 15°C (21°C - 5 – 0.5
the set room temperature is reached. If
the temperature is maintained for the
-
-
-
-
-
-
-
-
-