Publicité
Note:
1. Behavior at lock modes
Lock Mode
Button Lock
MENU Lock
POWER Lock
Remote control disable Lock the keys on RCU, but keep the buttons of front panel workable.
2. Example for value setting of SET_TV channel DTV
012-0: 0x 30 31 32
012-1: 0x 30 31 42
1012-2: 0x 41 31 52
1512-3: 0x 46 31 62
3. Tiling definition of H Monitors/ V Monitors/ and Position
4. Date & Time format definition
Value 1
0: Year
Date
1: Month+Day
0:Hour(24-hr format)+Min
Time
1: Sec
Behavior
1. Lock all buttons of front panel and RCU, except for "Power"
2. All the SET functions should be workable via RS32, even the ones with
according hot key in RCU like Mute,...etc.
1. Lock "MENU' key of front panel and RCU
2. The Factory and Hospitality modes should not be blocked for the model
using MENU-combined key to enter these two modes. Alternative
approach will be indicated separately if any limitation by model.
1. Lock "POWER" key of front and RCU.
2. The SET_POWER on/off should be workable via RS232, but does not
mean the POWER lock will be released under this case.
3. Can not be un-locked by reset in OSD setting
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when no PC
signal and neither not turn off when no other video signals after 15min.
Value 2
Year code of the first 2 digis
Month code
Hour code
0
31
Value 3
Year code of the last 2 digis
Day code
Minute code
Second code
Publicité
