Publicité
Les langues disponibles
Les langues disponibles
To descale
Descaler
De'Longhi descaler
Container
Recommended capacity: 2 l
Time
~45min
Important:
If the water softener filter is installed, it must be re-
moved before adding the descaler solution.
Put the filter back in the machine after the first tank of
rinsing has been completed.
The descaling procedure is described in the Quick Guide.
Please note:
•
Once the descaling cycle has begun, it cannot be inter-
rupted and must be completed with the entire rinse cycle.
•
After descaling, it is normal for the grounds container to
contain water.
•
If the water tank has not been filled to the MAX level after
descaling, the appliance prompts for a third rinse to en-
sure that the descaler solution has been completely elimi-
nated from the machine's internal circuits. Before starting
rinsing, remember to empty the drip tray.
13. EXPLANATION OF INDICATOR LIGHTS
Light
The beverage lights flash
The beverage and settings
lights are on steadily
Meaning
The machine is warming up:
wait
The machine is ready for
use: select the desired bev-
erage and relative options
Replace the filter (see
section "7. Water softener
filter")
Insufficient water in tank:
fill the tank
→
Light
25
Meaning
The water tank is missing, or
is not positioned correctly:
insert the tank correctly
General alarm: the inside of
the machine is very dirty.
Clean the machine thor-
oughly. If the message is
still displayed after cleaning,
contact De'Longhi Customer
Services and/or an approved
Service Centre
The infuser has not been re-
placed after cleaning: insert
the infuser as described in
section "11. Cleaning the
infuser"
No coffee beans: fill the
beans container, then press
any button to reset the
alarm.
The grinding is too fine and
the coffee is delivered too
slowly or not at all. Adjust
the coffee mill (section "4.6
Adjusting the coffee mill")
Too much coffee has been
used. Select a milder taste
or reduce the quantity of
pre-ground coffee
→
Publicité
