Alpina CH-Y02S Manuel D'utilisation page 8

appliance please refer to the safety advice above and the information
in the section "Bringing the appliance into use".
Operation
Before use
Before using the device for the first time, check that the
mains voltage corresponds with that indicated on the device.
Also check that your electrical mains system has adequate
capacity for the output indicated on the device.
Make sure that the mains lead does not present a trip
hazard. Always direct the mains lead away from the rear of
the device.
Protect the mains lead from sharp edges, pressure and hot
surfaces.
Bringing the appliance into use
The voltage at the power supply must match that shown on
the rating plate (220-240V ~ 50Hz) on the device.
Switching on and off