Whalen SPUS-FBPS-GM Instructions D'assemblage page 7

NOTE: DO NOT fully tighten all cam locks and bolts until you finish assembling all parts. Once
assembled, go back and fully tighten all cam locks and bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panel (H) using a
Phillips screwdriver.
4
4
3. Glue the Small Wood Dowels (4) into the inner holes of the Drawer Back Panel (I) and Drawer Sides (J
and K).
NOTE: It is very important to use a small amount of glue on both ends of dowels.
Assembly Instructions
H
J
K
I
4
4
7
3
4
4