Publicité
Les langues disponibles
Les langues disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#35 M8x60 2PCS
#49 φ8.1xφ10.6x1.5 5PCS
#50 φ8.2xφ19x1.5 3PCS
38
49
38
50
49
50
21
35
35
#60 S6 2PCS
27a
28a
14
40 43
15L
ASSEMBLY INSTRUCTIONS
#46 φ8.2xφ16x1.5 2PCS
3
46
40 49
2
#40 M8x16 2PCS
#43 φ8.2xφ22x1.5 2PCS
#14 2PCS
28a
27a
14
27
8
3
15R
#38 M8 2PCS
#40 M8x16 3PCS
#60 S6 1PC
S13
S10
S17
#61 S10-S13-S17 1PC
46 49
40
50 49 40
43
40
7
STEP 1:
Attach Front Stabilizer (No. 21) to
Seat Rail (No. 3) with 2 Bolts (No.
35), 2 Arc Washers (No. 50), 2
Spring Washers (No. 49), and 2
Cap Nuts (No. 38). Tighten and
secure with Spanner (No. 61).
Attach the Rear Stabilizer (No. 2) to
the Seat Rail (No. 3) with 3 Inner
Hex Screws (No. 40), 3 Spring
Washers (No. 49), 2 Flat Washers
(No. 46) and 1 Arc Washer (No. 50).
Tighten and secure with Allen
Wrench (No. 60).
STEP 2:
Remove 2 Flat Washers (No. 43), 2
Spacers (No. 14) and 2 Inner Hex
Screws (No. 40) from Long Shaft
(No. 8) with 2 Allen Wrenches (No.
60).
Insert Long Shaft (No. 8) into the
Seat Rail (No. 3) and insert 2
Spacers (No. 14) that were removed
onto the Long Shaft (No. 8) on both
ends. Then, slide the Pedals (No.
15L/R) onto each side of the Long
Shaft (No. 8). Secure with 2 Flat
Washers (No. 43) and 2 Inner Hex
Screws (No. 40) that were removed.
Tighten and secure with 2 Allen
Wrenches (No. 60).
Insert the Meter (No. 27) into the
meter support on the Seat Rail (No.
3). Then, connect the Sensor Wire
(No. 28a) with the Meter Wire (No.
27a).
Publicité
