SPECIFICATIONS:
TIME-------------------------------------------------------00:00-99:59 MIN
COUNT ---------------------------------------------------0-9999
T.COUNT (TOTAL COUNT) --------------------------0-9999
CALORIES -----------------------------------------------0.0-9999 KCAL
FUNCTIONS:
SCAN: Displays the functions automatically in the following order shown repeatedly every 6
seconds: TIME—COUNT—CALORIES—T.COUNT (TOTAL COUNT).
MODE: Press MODE to select and set a function. Press and hold for 3 seconds to reset TIME,
COUNT, and CALORIES.
SET: After selecting the function, press SET to set the value of TIME, COUNT, and CALORIES.
The meter will count down the value.
RESET: On set mode, press this button to reset the current value to zero. Press and hold this
button for 3 seconds to reset the value of TIME, COUNT, or CALORIES to zero, except T.COUNT
(TOTAL COUNT).
NOTE:
•
The meter will turn on when you start rowing or when you press a button.
•
After 4 minutes of inactivity, the meter will shut off automatically.
•
If you have problems with the meter display, change the batteries. This meter uses 2 1.5V AAA
batteries. Do not mix battery types. When you replace the batteries, replace both at the same
time. Do not mix old and new batteries.
•
Dispose batteries according to the guidelines of your state and region.
•
Replacing the batteries will reset all the values in the meter, including T. COUNT (TOTAL
COUNT).
METER INSTRUCTIONS
11