BS Charger BK15 Mode D'emploi page 4

TEMPERATURE & SAFETY PROTECTION:
The BK15 contains 4 safety protections:
 INTERNAL OVERHEAT PROTECTION: The BK15 is built-in with overheat and overload
electronic circuit. When the charger is overheated, the charger will decrease the charging
current. If temperature is decreased, the charger will resume to normal charging.
 TIMER PROTECTION: The charger provides the maximum charging timer management for
each charging stage; this condition may occur if attempting to charge any severely discharged
or heavily sulfated battery. Once the charger is timed-out, the charger will stop charging for
protecting your battery and the RED LED will be slow FLASH, while this situation occurs,
please check with your battery statues.
 REVERSE POLARITY: The charger has reverse battery protection. If a reverse battery exists
(Red LED ON, while output leads are connected backwards), simply unplug charger from
AC power and properly remake the connections as described in this manual.
 SHORT CIRCUIT PROTECTION: The charger has output short-circuit protection. If the
charger output lead short condition exists (Red LED ON), while output leads are connected
backwards), simply unplug charger from AC power and properly remake the connections as
described in this manual. The charger employs the firm hardware and smart program to
automatically detect the output connections. Once the charger detects the output short-circuit
or reverse polarity, it will not deliver any output current.
BATTERY TYPES & CAPACITY:
 Suits all Lead Acid Type Batteries. (GEL, SLA, AGM, Calcium)
 12 Volt Output, Charging current 1500mA
 Battery Capacity: The following maximum AH capacities are to be used as a general guide
only: some batteries maybe able to handle a higher Charge Current. Check with the battery
Manufacturer when charging batteries with small capacity.
Charge Current (for each channel)
Battery Capacity: Charging
Battery Capacity: Maintaining
ELECTRICAL PARTS:
Delivered with:
 Input Cord: 183 cm VDE cord with 3 PIN plug
 Output Cords ( 5 groups): 120 cm with quick Connector and Battery Clamp
ENVIRONMENTAL CHARACTERISTICS:
 Operating Temperature: 0 to 40° C
 Storage Temperature: -25 to 85°C
 Operating Humidity Range: 0 to 90% RH
 Cooling: By fan forced air
1500mA
4-30AH
4-120 AH
4