Fiamma Compass Dual Boiler II Manuel D'instructions page 32

2. Within 30 seconds, press the key you want to program, choosing between the 4 keys that
correspond to portions (keys 1-4), for exemple key 1. Pressing the key, drink production starts. Key
5 remains lit during the programming phase.
3. When the desired amount of coffee has been produced, press any of the keys 1-4 on the active
group in order to stop the production. The LED of the programmed key turns off, while all other
keys light up.
4. In order to program the remaining keys, repeat steps 2-3.
7.1.1. TROUBLESHOOTING: PORTION PROGRAMMING DID NOT WORK
In case the programming of a key did not work, please check the following:
- Correct functioning of the water circuit
- Correct functioning of the flowmeter
- Correct association between flowmeter and group.
7.2. Programming of hot water portion
 The saved settings for the hot water keys on group 1 are NOT transferred to the other groups!
1. With the machine in ON mode, press key 5 of group 1 (leftmost group) and keep it pressed for 5
seconds. Key 5 starts to blink and the display shows the following message
2. Within 30 seconds, press the key 6. Pressing the key, hot water production starts. Key 5 remains lit
during the programming phase.
32
Compass Espresso Coffee Machine by fiamma – Operating Manual
(Translated from original language) ENGLISH