Non-Use, Storage, And Moving Care - Whirlpool HybridCare Guide D'utilisation Et D'entretien

CLEANING THE COOLING FAN SCREEN
The cooling fan screen is located on the back lower right of
the dryer. Pull dryer away from wall and vacuum cooling fan
screen with brush attachment.
IMPORTANT: Clean cooling fan screen, if needed, for optimal
performance. A blocked screen will increase drying time.

NON-USE, STORAGE, AND MOVING CARE

Install and store your dryer where it will not freeze. Because
some water may stay in the hose, freezing can damage your
dryer. If storing or moving your dryer during freezing weather,
winterize it.
Non-Use or Storage Care
Operate your dryer only when you are at home. If you will be
on vacation or not using your dryer for an extended period of
time, you should:
1. Unplug dryer or disconnect power.
2. Clean lint screen. See "Cleaning the Lint Screen."
Moving Care
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Make sure leveling legs are secure in dryer base.
3. Use tape to secure dryer door.
12
For direct-wired dryers:
1. Disconnect power.
2. Disconnect wiring.
3. Make sure leveling legs are secure in dryer base.
4. Use tape to secure dryer door.
Reinstalling the Dryer
Follow the Installation Instructions to locate, level, and
connect the dryer.