Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timer and sleep operation (Remote control only) (continued)
13
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
Notes:
l When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
"USB" or "AUDIO IN" or "LINE IN" in step 5.
l This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
"Cancelling the timer setting" of this page.
Checking the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer Call", and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer Off", and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer On", and press the ENTER button.
4
Press the STANDBY/ON button to enter the power
stand-by mode.
or
button to select
or
button to select
or
button to select
or
button to select
or
button to select
or
button to select
En-22
n Sleep operation
The radio, compact disc, iPod, USB, Audio In and Line In
can all be turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the direct search button to set
the time (1 minute - 99 minutes)
4
Press the ENTER button. "SLEEP" will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
Whilst "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the STANDBY/ON button whilst "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1
Whilst "SLEEP" is indicated, press the SLEEP button.
2
Within 5 seconds, press the "0" button twice until
"SLEEP 00" appears.
3
Press the ENTER button.
n To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 21).
Timer playback
Sleep timer
setting
setting
1-99 minutes
Sleep operation will
automatically stop
End
time
Desired time
Timer playback
start time

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X-hm50-s

Table des Matières