Installation Instructions; Important Matters; Building-In - ETNA A2793RVS Notice D'utilisation

YOUR COFFEEPADMACHINE

8.1 Important matters

• After removing the packaging, make sure the product is complete
and undamaged. If in doubt, do not use the appliance and contact
a qualified professional.
• Installation must be carried out by a qualified technician and in
compliance with current regulations.
• Packing elements (plastic bags, polystyrene etc.) must not be left
within reach of children as they may represent a hazard.
• Never install the appliance in environments where the
temperature may reach 0 °C or lower (the appliance may be
damaged if the water freezes).
• Make sure the mains voltage corresponds to the voltage indicated
on the appliance rating plate. Connect the appliance to an
efficiently earthed socket with a minimum current rating of 10A
only. The manufacturer may not be considered liable for possible
incidents caused by the failure to adequately earth the mains.
• If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
• The power socket has to remain visible after installation.
• The power cable on this appliance must not be replaced by the
user as this operation requires the use of special tools. If the cable
is damaged or requires replacing, contact an authorised service
centre only to avoid all risks.
GB 20

8 Installation instructions

YOUR COFFEEPADMACHINE

8.2 Building-in

Please check the minimum measures necessary to the proper
installation of the appliance. The coffeepadmachine must be installed
in a column unit, which must in turn be fixed to the wall.
m
8 0 m
.
m in
1
5 6 0 m m m
5 5 0
m
m
. 5 0 m
m in
.
m in
8 0 m
m
m in .
5
GB 21
8 Installation instructions
2
3