Use; Preparation; To Rinse The Machine - ETNA A2793RVS Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

YOUR COFFEEPADMACHINE
Turn the appliance off as soon as you have finished using it and
when you are cleaning it.
Should you decide not to use the appliance anymore, make it
inoperative by cutting the power cord after removing the plug
from the socket. We also recommend making all potentially
dangerous parts of the appliance harmless, particularly for
children who might be tempted to play with it.
Never use the appliance if it is not working properly, or if it has
been damaged. Any intervention other than cleaning and normal
maintenance by the customer must be carried out by an approved
service centre.
Never immerse any part of the main body, lid, power cord and
plug in water or any other liquid to protect against electrical
hazards.
If the appliance is used for other purposes than intended, or is it
not handled in accordance with the instruction manual, the full
responsibility for any consequences will rest with the user. Any
damages to the product or other things are not covered by the
warranty.
The parts which could come into contact with coffee or milk
conform to the provisions of the EEC directive 1935/2004
relating to materials suitable for contact with foodstuffs.
This appliance is marked according to the European directive
2004/108/EC on Waste Electrical and Electronic Equipment
(WEEE).
GB 8
4 Safety instructions
YOUR COFFEEPADMACHINE

5.1 Preparation

WARNING! Before you make the very first cup of coffee, you must
rinse the appliance with water. Follow the next steps carefully to
make sure that the boiler is filled with water correctly.
Clean the outside of the appliance with only a damp cloth and
dry it with a dry cloth. Clean the parts: the multi-padholder, the
cremamaker, the drawer, the grid and the driptray with warm water
and some washing-up liquid or in the dishwasher and make sure that
the parts are dry before next use.

5.2 To rinse the machine

1.
Fill the removable water tank with cold water to the
level and place it in the coffeepadmachine (see fig. 1).
1
2.
Open the drawer for the coffeepadholder by gently pulling on the
handles of the coffee-outlet (see fig. 2). The drawer will now slide
open.
2
3.
Place a coffeepad in the multipadholder with the round side
downwards and press it lightly. Please make sure that the coffee
is evenly devided.

5 Use

maximum
GB 9

Publicité

Table des Matières
loading

Table des Matières