Maintenance; Cleaning And Maintenance - ETNA A2793RVS Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

YOUR COFFEEPADMACHINE

Cleaning and maintenance

We advise to clean the coffeepadmachine on a regular bases. Regular
cleaning will prolong the life of your appliance and will guarantee
optimal brewing results. Please do as follows:
Check before cleaning if the coffeepadmachine is switched off.
Clean the outside of the appliance with only a damp cloth and dry
it with a dry cloth. Never use any abrasives!
Never place the appliance in or under running water.
Cleaning separate parts
1.
Remove the drawer by pulling and slightly lifting it towards you.
This movement unlocks the drawer and you can take it out of the
machine.
2.
Remove the coffee outlet the same way as the drawer. To place the
coffee outlet and the drawer back, all you need to do is to place
the items correctly on the sliders. Push the drawer back in the
machine. A "click" indicates that the drawer is placed correctly in
the guides.
3.
Clean the separate parts: the multi-padholder, the cremamaker,
the drawer, the coffee outlet, the grid and the driptray with warm
water and some washing-up liquid or in the dishwasher.
Pay attention to clogging the small drains in the middle of the
padholder and the outside of the cremamaker.
Remove the cremamaker by pushing it out, from below, with
a blunt object like a pen or the back of a teaspoon (this also
concerns the teamaker in the teapadholder) and rinse it with
warm water. One grain of coffee can cause it to be blocked.
4.
Make sure that the parts are dry before next use.
5.
Check every day if the driptray is empty and there are no used
coffeepads in the appliance. If the driptray is full, it will overflow.
GB 14

6 Maintenance

YOUR COFFEEPADMACHINE
Descaling
We advise to descale your coffeepadmachine on a regular bases. The
period depends on the condition of your water and the frequency of
use. We advise to descale the coffeepadmachine approx. every three
months. You can use a special descalingproduct for coffeemachines.
Descaling solu tion can be purchased from authorised technical service
centres.
When you use a descaling product especially for coffeemachines,
you will have to follow the instructions on the package of the
descalingproduct accordingly.
1.
Switch the coffeepadmachine off with the on/off button
2.
Fill the reservoir according the instructions on the package of the
descalingproduct.
3.
Place a large mug or bowl under the coffee-outlet to collect the
descalingmixture.
4.
Open the drawer for the coffeepadholder by pulling the handle on
the side of the drawer outwards gently (see fig. 2). The drawer will
now slide open.
5.
Place a new or used coffeepad in the multi-padholder with the
bulging side down and press it lightly. The coffeepadmachine will
be better descaled when you do this and it cannot be clogged with
descalingbits.
6.
Slide the drawer gently inwards until it can't go further.
7.
Switch the coffeepadmachine on with the on/off button
press directly the 1-cup button
same time. Do not let the machine heat up.
8.
The coffeepadmachine will now rinse with the descalingmixture.
The coffeepadmachine will automatically switch itself off when the
rinsingprocess is ended.
9.
Repeat the process until the waterreservoir is empty. After
the descaling you will have to rinse the machine upto 3 times
with 1 liter of fresh cold water to make sure that there is no
descalingproduct left behind in the coffeepadmachine to avoid a
bad taste to the coffee.
GB 15
6 Maintenance
.
and
and 2-cups button
at the

Publicité

Table des Matières
loading

Table des Matières