Télécharger Imprimer la page

WEBTEC CTR J1939 Manuel Utilisateur page 3

Publicité

Les langues disponibles

Les langues disponibles

Introduction
Webtec turbine flow meters provide a precision solution to the measurement of flow in hydraulic systems on test
stands, machine tools and other fixed or mobile applications. The flow meters can be installed anywhere in the
hydraulic circuit for production testing, commissioning, development testing and analysis of control systems. The
compact design of the flow meter allows them to be installed where space is limited. The CTR turbine flow meter has
a built-in microcontroller that conditions the signal from the flow meter to provide an SAE J1939 compatible output.
The integral loading valve provides smooth progressive pressure control in both flow directions allowing components
such as cylinders or motors to be tested without re-plumbing the test connections.
The range of products can be divided into two families:
1. Standard CT J1939
2. CTR J1939, a flow turbine with a built in load valve
This manual covers the CTR J1939 range of products.
Before first operating the equipment read the whole of these instructions. Safety may be impaired if they are not followed.
Webtec have been designing and manufacturing flow meters and hydraulics components for over 50 years. We operate
within a Quality Management System that complies with the requirements of BS EN ISO 9001 which is externally
audited and certificated each year. Beyond compliance to the standard, Webtec is committed to continually improving
in everything we do; with particular emphasis on understanding what matters to our customers and suppliers, and
designing our systems and work to meet their needs. We are always keen to hear from customers who may have
special requirements not covered by our standard ranges
1

Publicité

loading