Domo DO360A Mode D'emploi page 56

SHORT
SHORTCUT
CUT
With this button you can set and switch on a preferential setting.
If you use a certain setting more often, you can set this by pressing the SHORTCUT button for three
seconds. The apparatus then remembers the settings that are switched on at the moment of pressing.
These settings can include: the user setting (MODE), set temperature, ventilation speed (FAN) and
possibly also the SLEEP setting.
The moment you press the SHORTCUT button, the apparatus will work at the previously determined
settings. If you push the shortcut button, the first time after you've connected the appliance, the system
will be automatically in auto-function. This means 26° and the fan-speed is auto.
TIMER
TIMER ON BUTTON
ON
Use this button if you want the air conditioning to start working at a certain
time. Every press of this button will elevate the current time. The max.
ng the TIMER function
Timer setting is 24 hours. For cancelling the auto on function you keep on
conditioning unit has two
pressing the "timer on" button until "0.0" is displayed.
lated functions:
R ON- sets the amount of timer after
Attention: pressing the ON/OFF button on the remote control will cancel all
h the unit will automatically turn on.
R OFF- sets the amount of time after
timers.
h the unit will automatically turn off.
ON function
Make sure the unit is plugged in.
MER ON function allows you to set
d of time after which the unit will
Press the "timer on"button. The display will show the last setting of the
tically turn on, such as when you
"timer on" mode. Press the "timer on" button again to start setting the
ome from work.
s the TIMER ON button. By delay time you want to air conditioning to start working. Every time you
lt, the last time period that you
press the timer the delay time will change. Max. delay timer setting is 24
nd an "h" (indicating hours)will
ar on the display.
hours.
: This number indicates the
After setting the timer, it takes about 2 sec. Before the set temperature will be displayed again.
nt of time after the current time
ou want the unit to turn on.
Illustrations to illustrate a 2.5-hour delayed start.
xample, if you set TIMER ON for
rs, " 2. 0h " will appear on the
n, and the unit will turn on after
TIMER
TIMER OFF BUTTON
rs.
OFF
Press this button if you want your air conditioning to shut down at a certain
s the TIMER ON button repeatedly
the time when you want the unit to
time. You can elevate the current time every time you press the button .
on.
2 seconds, then the TIMER ON
Max timer setting is 24 hours. For cancelling the auto on function you keep
on will be activated. The digital
on pressing the "timer on" button until "0.0" is displayed.
y on your remote control will then
to the temperature display.
Attention: pressing the ON/OFF button on the remote control will cancel all
timers.
Press the "timer off"button. The display will show the last setting of the
"timer off" mode. Press the "timer off" button again to start setting the
delay time you want the air conditioning to stop working. Every time
you press the timer the delay time will change. Max to set delay time
is 24 hours. After setting the timer, it takes about 2 sec. Before the set
temperature will be displayed again.
Illustrations to illustrate a 5-hour delayed stop.
Timer on + Timer off
You can also switch on both functions simultaneously. This determines when you switch on the apparatus,
but also when the apparatus switches off.
56
DO360A
Setting the TIMER function
Your air conditioning unit has two
timer-related functions:
TIMER ON- sets the amount of timer after
1 2
which the unit will automatically turn on.
TIMER OFF- sets the amount of time after
which the unit will automatically turn off.
TIMER ON TIMER ON
TIMER ON function
The TIMER ON function allows you to set
a period of time after which the unit will
automatically turn on, such as when you
come home from work.
3 4
1. Press the TIMER ON button. By
1sec
default, the last time period that you
set and an "h" (indicating hours)will
appear on the display.
Note: This number indicates the
amount of time after the current time
that you want the unit to turn on.
For example, if you set TIMER ON for
2 hours, " 2. 0h "
screen, and the unit will turn on after
2 hours.
Example: Setting unit to turn on after 2.5
2. Press the TIMER ON button repeatedly
hours.
to set the time when you want the unit to
turn on.
3. Wait 2 seconds, then the TIMER ON
function will be activated. The digital
display on your remote control will then
return to the temperature display.
9 9
x5
2sec
2. Press the TIMER OFF button repeatedly
will appear on the
3. Wait 2 seconds, then the TIMER OFF
9 9
1 2
TIMER OFF function
The TIMER OFF function allows you to
set a period of time after which the unit
TIMER ON TIMER ON
will automatically turn off, such as when
you wake up.
1. Press the TIMER OFF button. By
default, the last time period that you
3 4
set and an "h" (indicating hours)will
1sec
appear on the display.
Note: This number indicates the
amount of time after the current time
that you want the unit to turn off.
For example, if you set TIMER OFF for
2 hours, " 2. 0h " will appear on the
screen, and the unit will turn off after
2 hours.
to set the time when you want the unit to
Example: Setting unit to turn on after 2.5
turn off.
hours.
function will be activated. The digital
display on your remote control will then
return to the temperature display.
1 2
TIMER OFF TIMER OFF
3 4
1sec
Example: Setting unit to turn off after 5
hours.
x5
i
h
h
z
2sec
x10
2sec
10 10