Publicité
Les langues disponibles
Les langues disponibles
Fresh Food Compartment Shelves
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Full-Width Shelves
Some models have a stationary tempered glass shelf or
two steel wire stationary shelves. These shelves can be
moved to another place in the fresh food compartment.
When placed correctly on the shelf supports, the shelf
will stop before coming completely out of the refrigerator
and will not tilt when you place food on it or remove food
from it.
Pull glass shelves forward so the glass rests evenly on
side rails. For units with glass shelves, rail positions 2
and 4/5 are recommended.
CAUTION
with warm water when they are cold. Glass shelves and
covers may break if exposed to sudden temperature
changes or impact such as bumping or dropping.
Tempered glass is designed to shatter into many small
pieces if it breaks.
Rail Position 2
Rail Position 4
Rail Position 6
Freezer Compartment Shelves
When placed correctly on the shelf supports, the
steel wire stationary shelves will stop before coming
place food on it or remove food from it.
6
Rail Position 1
Rail Position 3
Rail Position 5
2
1
Wire shelf - lift back end and pull forward to remove
2
1
Glass shelf - lift the front edge (1), push shelf back (2),
lift shelf up and pull forward (3) to remove.
Some models have glass shelves.
To ensure shelf functions as intended, slide shelf to the
furthest back retention point:
• Glass Shelf - front slot 1
• Steel Wire Shelf - rear slot 2
CAUTION
with warm water when they are cold. Glass shelves and
covers may break if exposed to sudden temperature
changes or impact such as bumping or dropping.
Tempered glass is designed to shatter into many small
pieces if it breaks.
3
49-1000478 Rev. 4
Publicité
