Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
INSTALLING THE DOOR HANDLE
PLASTIC HANDLE
1A
correspond with the handle side (the side
opposite the hinge).
STAINLESS STEEL HANDLE
1B
Attach plastic bushing to the door with the
fasteners correspond with the handle side (the
side opposite the hinge).
14
Handle Fastener
Bushing
with Screw
2
HANDLE INSTALLATION
up onto plastic bushing or fastener with the
screws at the bottom of the handle.
2. Attach handle to fresh food door by sliding
handle down onto plastic bushing or fastener
with the screws at top of handle.
NOTE: Be sure to remove
if applicable)
For Stainless Steel Handles Only
that covers the door
contact surface shown
in the picture. This
surface from direct
contact with the handle.
BADGE AND PLUG BUTTON
3
INSTALLATION
1. Place a plug button on the opposite side of the
fresh food door across from the handle.
2. Remove the backing on the GE Appliances
badge and carefully place it in the hole
sure the badge is oriented the correct way
before applying it to the door.
NOTE: on some pocket handle
*
models, a template to properly locate
the badge is supplied with the product.
model without a factory installed
badge, see the instructions printed on
the template for further details.
*
Badge
Plug
button
49-1000478 Rev. 4
Publicité
