Publicité
Les langues disponibles
Les langues disponibles
Inspection/
Tasks
Maintenance interval
Before each use
-
-
-
Per quarter
-
-
-
Replace the brake discs as needed
Be careful: Do not get any grease on the brake discs or preceding surfaces
Annually
-
-
-
-
* Texaco 'Texclad premium 2' is recommended by us for the worm wheel gearing (or equivalent). Orders can be placed through your Gebuwin dealer or on the
website: www.gebuwin.com.
5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates heavily
The load cannot be held
The load pressure brake does not
function
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer. The exploded view diagram with regard to the servicing parts is available on our
website www.gebuwin.com. Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only, correct functioning cannot otherwise be guaranteed!
7. Environment
At the end of the winch's lifespan, the various winch parts must be disposed of according to the current environmental regulations.
8. Guarantee
Gebuwin B.V. guarantees for a period of 2 years the materials and workmanship of the Gebuwin hand driven winches with the exception of the economy line
HW type winches. The HW type and all electrical winches and parts have a guaranty period of 1 year on materials and workmanship.
visually check cable and loading hook
for WW type winches check amount of grease* on the worm wheel gearing
check the brake function
visually check cable and loading hook for any fracture
grease the worm - worm wheel gearing
check the load pressure brake for wear and tear
check the cable according to DIN 15020 pg. 2 for wear and tear; also test and maintain the minimum breaking
force.
check the tightness of the mounting bolts
check all the winch parts for wear and tear; replace where necessary; grease where needed.
check the type identity sticker for clarity
Cause
-
no grease on the gearing
dirt on the gearing
-
during mounting the winch has pulled
-
askew
the cable has been incorrectly wound round
-
the drum which means the crank turning
direction is incorrect
the brake discs are either worn down or
-
faulty
braking mechanism and/or discs are
-
jammed due to infrequent use
Solution
-
apply grease
clean with a detergent and re-grease
-
-
level the mounting surface and re-mount the
winch
wind the cable correctly around the drum
-
-
check and/or renew the brake discs
loosen the brake by hitting the crank in the
-
correct turning direction with the flat of the
hand
10
Publicité
