Replacing Battery; Get Started; Auto Standby - THOMSON SB100BT Mode D'emploi

4. VOLUME+
Press to adjust the volume+
5.
Skip to the previous track.
6. VOLUME-
Press to adjust the volume-
7. BT
Press to Bluetooth mode.
8. MUTE
Press to Mute or restore volume.
9. AUX
Press to Aux input mode.
10. LINE IN
Press to Line input mode
11.
start or pause play.
12.
Skip to the next track.

Replacing battery

The remote control works with lithium button cell CR2025
3V batteries. When the remote no longer works you need to
replace the batteries as follows:
• Press the tab on the side of the battery cover to release it and allow the battery support
to come out.
• Replace the battery paying attention to the correct orientation of the poles.
• Replace the battery support pushing it inside until you hear a "click".
ATTENTION : Danger of explosion if batteries are not inserted correct.

Get started

Power
CAUTION :
•
•
•
Place the unit in the desired position and unravel the mains cable. Insert the cable into the
supply socket and switch on if applicable.

Auto standby

When playing media from a connected device, the Tower automatically switches to standby if
• No button is pressed for 10 minutes,
Risk of product damager! Make sure that the
power voltage corresponds to the voltage
printed on the back label.
Risk of electric shock! When you unplug the
AC power cord always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
- EN 17 -
CR2025