THOMSON SB100BT Mode D'emploi page 13

Getting Started
Safety Warning and Notice
What's in the box
Overview of the main unit
Overview of Remote Control
Replacing battery
Get started
Auto standby
Getting Started
• Remove the appliance from the box.
• Remove any packaging from the product.
• Place the packaging inside the box and either or dispose of safely.
Safety Warning and Notice
Read and understand all instructions before you use this product. If damage is
caused by failure to follow the instructions, the warranty does not apply.
1. Never remove the casing of this device.
2. Never place this device on other electrical equipment.
3. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
device. Make sure that the power voltage corresponds to the voltage printed
on the back label. When you unplug the AC power cord always pull the plug
from the socket. Never pull the cord. Before connecting the AC power cord,
ensure you have completed all other connections
4. Only use attachments/accessories specified by the manufacturer.
5. Refer all servicing to qualified service personnel. Servicing is required when the device
has been damaged in anyway, such as :
- damaged power-supply cord,
- spilled liquid or objects have inserted into the device,
- the device has been exposed to rain or moisture,
- the device does not operate normally,
- or the device has been dropped.
6. The rating label is placed on the bottom side of apparatus.
7. Do not block any ventilation openings
8. Make sure there is enough space around the product for ventilation.
9. The use of this device must be done in moderate climates, away from direct sunlight,
naked flames or heat. heat registers, stoves, or other apparatus (including amplifiers) that
produce heat. Do not install near any heat sources.
10. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire, etc.
11. Unplug before cleaning. Never lubricate any part of this device. Clean the appliance with
a soft cloth. Do not use abrasives or harsh cleaners.
12. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect
this device from the power if necessary.
13 Use
13 Bluetooth Mode
15 Wall mounting for your sound bar
15 Technical specifications
16 Care of the environment
17 Additional information
17 Declaration of conformity
17
- EN 13 -
18
18
19
20
20
21
21