Publicité
Les langues disponibles
Les langues disponibles
Important!
Please note when programming all references to press = to press once and then
immediately release the button.
The earpiece of the handset may attract small ferromagnetic objects such as staples and
pins, care should be taken when placing the handset near these items.
Connection/Basic setting
1. Connect the curly cord to the handset and to the socket marked
on the side of the telephone.
2. Connect the mains adapter to the socket marked DC 9V on the back
of the telephone and then to an electrical wall socket.
3. The display should flash the word ENGLISH. If not press and hold
for approximately 4 seconds.
v
4. Select the desired language using
5. Select the desired contrast setting (2=normal) using
6. Set the hour (00-23) using
7. Set the minute using
8. Set the day using
9. Set the month using
10. Ensure the correct dialling method is displayed (ie: TONE). Press
11. Select the required ringer melody using
12. Ensure the correct Recall time is displayed (ie: 100). Press
13. Connect the telephone line cord to the socket marked
back of the telephone, and then to a network wall socket.
14. Lift the handset and listen for the dial tone.
To change any of the above settings, press and hold
4 seconds and repeat steps 4. - 12. above.
English
v
/
. Press
v
V
/
. Press
v
V
/
. Press
v
V
0
/
. Press
v
V
/
. Press
.
V
0
.
0
.
0
.
.
0
/
. Press
v
V
v
Q
/
. Press
v
V
0
0
.
0
.
0
on the
T
for approximately
.
.
Publicité
