Storage Case; Routine Maintenance - Cembre B450ND-BV Notice D'utilisation Et Entretien

3.2) Storage case

3.2) Storage case
When not in use, the tool should be stored and trans- When not in use, the tool should be stored and trans-
ported in the plastic case supplied to prevent damage. ported in the plastic case supplied to prevent damage.
The case, type VAL-P22, is suitable for storing the tool, The case, type VAL-P22, is suitable for storing the tool,
the accessories, up to 9 die sets and pre-prepared the accessories, up to 9 die sets and pre-prepared
compression connectors. compression connectors.
VAL-P22: Size 465x315x116 mm (18.3x12.4x4.6 inches). VAL-P22: Size 465x315x116 mm (18.3x12.4x4.6 inches).
Weight 1,5 kg (3.3 lbs). Weight 1,5 kg (3.3 lbs).

3.3) Routine maintenance

3.3) Routine maintenance
When the tool reaches the predetermined number of hours worked, When the tool reaches the predetermined number of hours worked,
it will signal via an audible alarm that routine maintenance is it will signal via an audible alarm that routine maintenance is
recommended. recommended.
The tool will continue to work, however 15 sec. after use an alarm comprising 3 beeps The tool will continue to work, however 15 sec. after use an alarm comprising 3 beeps
combined with illumination of the worklights (2) will signal that its return to Cembre
combined with illumination of the worklights (2) will signal that its return to
service is recommended (see section 5). service is recommended (see section 5).
4. CONNECTION TO COMPUTER (Smartool technology) 4. CONNECTION TO COMPUTER (Smartool technology)
The memory card integrated in the tool records operating data The memory card integrated in the tool records operating data
for transfer via the USB cable supplied. for transfer via the USB cable supplied.
To view and manage this data, go to www.cembre.com To view and manage this data, go to
register in the dedicated area, then download the free Cembre
register in the dedicated area, then download the free
software software CEM_SWBT01 CEM_SWBT01. .
Keeping the Firmware of the tool updated, via free of charge Keeping the Firmware of the tool updated, via free of charge
download from here, will optimise the tool's performance. download from here, will optimise the tool's performance.
5. RETURN TO Cembre Cembre FOR OVERHAUL
5. RETURN TO
In the case of a breakdown contact our Area Agent who will advise you on the problem and give In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible, you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre
attach a copy of the Test Certifi cate supplied by
the form available in the "ASSISTANCE" section of the Cembre
the form available in the "ASSISTANCE" section of the
9
www.cembre.com and
Cembre
FOR OVERHAUL
Cembre together with the tool or fi ll in and attach
Cembre website.
and
together with the tool or fi ll in and attach
website.
Cembre for
for