Publicité
Fine Tuning
The fine tuning selection SET gives to possibility to set the temperatures by sublevels; each
temperature level has three sublevels.
How to use the fine tuning function:
•
Press the SET key for 8 seconds to enter fine tuning selection mode. When the appliance
enters the mode, an acoustic signal is made and the LED of currently selected cooling level
blinks.
•
By short pressing the SET key within 5 seconds, the fine tuning setting increases and, at
each pressing, an acoustic signal is made.
•
During fine tuning, the LED of the selected cooling level is fixed, while the LED of the
selected sublevel blinks.
•
If no key is pressed for 5 seconds, the system automatically exits from fine tuning selection
mode. The fine tuning setting is saved and the LED of the selected fridge temperature is
fixed.
•
If the fine tuning is activated again, the setting will start from the previously stored level.
Super Cool function
It is suggested to switch on the Super Cool function if a large quantity of food should be stored (for
example after the purchase). The Super-Cool function accelerates the cooling of fresh food and
protects the goods already stored from undesirable warming. When the function is activated, the
temperature of the fridge is automatically set at 2 °C.
How to use the Super Cool function:
•
The function can be activated by pressing many times the SET key until the Super Cool LED
is turned ON or by selecting it from the app. If the function is activated, the corresponding
icon on the control panel will be turned on.
•
To exit the Super Cool function, press the SET key again.
•
The Super Cool function automatically ends after 30 hours running.
•
When the Super Cool ends, the corresponding icon of the control panel turns off and the
previously set cooling level is restored.
Super Freeze function
The super freezing function accelerates the freezing of fresh food and protects the goods already
stored from undesirable warming. If a large amount of food has to be freeze, it is recommended to set
the Super Freeze function on 24h before the usage. When the function is activated, the temperature
is automatically set at -25 °C.
How to use the Super Freeze function:
•
The function can be launched only by selecting it from the app. If the function is activated,
it will be shown by the app; there is no indication on the control panel.
•
To exit the Super Freeze function, turn it off from the app.
•
The Super Freeze function automatically ends when the function has lasted for more than
50 hours.
EN 4
Publicité
