Publicité
Les langues disponibles
Les langues disponibles
5. PROGRAMMING THE QUANTITIES OF COFFEE IN THE CUP
The machine is set by default to automatically deliver standard quantities. To change these quantities, proceed as follows:
1. Place one or two cups
under the portafilter
spouts.
Default
quantity
35 ml
(1.18 fl oz)
70 ml
(2.37 fl oz)
6. MAKING CAPPUCCINO
1. To use tall glasses, re-
move the drip tray (A9)
and stand the glasses on
the glasses tray (A10)
Tips for best results:
•
Recommended milk quantity for cappuccino: 100 ml/ 3.5 fl oz.
•
For a denser more even froth, you must use milk at refrigerator temperature (about
5°C/41°F).
•
When steam is ready, before frothing milk, position an empty container under the
frother and open the dial for a few seconds to eliminate any air left in the circuit.
Close the dial again and proceed.
1
2. Press and hold the
button you want to
programme (
).
Programmable quantity
from ≃15 to ≃90 ml
(from ≃0.51 to ≃3.04 fl oz)
from ≃30 to ≃180 ml
(from ≃1.01 to ≃6.09 fl oz)
1
2. Prepare the espresso cof-
fees as described in the
previous sections, using
sufficiently large cups.
2
3. The coffee maker starts
delivering coffee and
the other coffee button
or
flashes to indicate that
the machine is in pro-
gramming mode.
2
3. Fill a milk pitcher with
fresh cold milk. Milk will
up to triple in volume.
8
3
4. Once the required quantity
of coffee has been deliv-
ered into the cup, release
the button. Delivery stops
and the light flashes to
indicate that the quantity
has been saved correctly.
3
4. Press the
The light flashes. When
the light comes steady, the
appliance is ready to deliv-
er steam.
4
4
button.
Publicité
