Publicité
Les langues disponibles
Les langues disponibles
2. Rinse the filters under running water (fig. 7).
3. Make sure the holes are not clogged. If necessary, clean
with a pin (fig. 5-7).
4. Dry all the components with a cloth.
5. Put the perforated filter back in the housing and press as far
as it will go (fig. 4).
Pod filter
Rinse under running water. Make sure the holes are not clogged.
If necessary, clean with a pin (figs. 8 - 9).
12.3 Cleaning the brewing unit
After every 200 coffees, rinse the brewing unit by delivering
about 0.5 l of water from the brewing unit (press the coffee but-
ton without using ground coffee).
12.4 Other cleaning operations
1. Do not use solvents or abrasive detergents to clean the cof-
fee maker. Use a soft damp cloth only.
2. Clean the portafilter cup.
12.5 Cleaning the water tank
1. Clean the water tank regularly (about once a month) and
whenever you replace the water softener filter (if present)
with a damp cloth and a little mild washing up liquid;
2. Remove the filter (if present) and rinse with running water;
3. Put the filter (if provided) back in the machine, fill the tank
with fresh water and replace the tank;
4. (If water filter is present)) Deliver about 100 ml of water.
6
8
7
9
13
Publicité
