Preparing The Ceramill Motion 2 - Amann Girrbach Ceramill motion 2 Instructions D'utilisation

A P P L I C A T I O N
▷ Depending on your selection in the Ceramill
Match 2, insert up to three blanks into the blank
E N
holder for glass ceramic blanks with the groove fac-
ing frontward, and secure them with the Allen key.
Fig. 2
10
4.2

Preparing the Ceramill Motion 2

When the Ceramill Motion 2 is set up for dry
processing:
▷ Convert the Ceramill Motion 2 for wet processing
(see Ceramill Motion 2 Operating Instructions)
▷ Disengage lever [3] and pull off the transparent
splash guard [1] toward the front.
2
1
A
Fig. 3 Five-axis model
2
1
A
Fig. 4 Four-axis model
Legend to figure 3 and figure 4:
1 Splash guard
2 Blank holder
3 Lever
A Operation button
3
3