Ryobi RBC30SES Manuel D'utilisation page 23

All manuals and user guides at all-guides.com
GB
F D E I P NL S
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORISED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE
Grass wraps round shaft 1. Cutting tall grass at
housing and string head.
2. Operating trimmer at
Bump knob hard to turn. Screws threads dirty or
damaged.
Lubricant drips from muffler. 1. Operating trimmer at
2. Check lubricant/fuel mixture. 2. Use fresh fuel and the correct synthetic 2-stroke lubricant mix.
3. Air filter dirty.
NOTE: If your unit exhibits specifi c performance problem(s) where the Troubleshooting section recommends a clockwise screw
adjustment on the carburetor and no adjustments have been made since original purchase, the unit should be taken to an authorized
service center for repair. In most cases, the needed adjustment is a simple task for the trained service representative.
960643004-02.indd 20 960643004-02.indd 20
DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT
English
TROUBLESHOOTING
SOLUTION
1. Cut tall grass from the top down.
ground level.
2. Operate trimmer at full throttle.
part throttle.
Clean threads and lubricate with grease - if no
improvement, replace bump knob.
1. Operate trimmer at full throttle.
part throttle.
3. Clean per instruction in Maintenance Section.
20
LV SK BG
12/13/03 2:27:54 PM 12/13/03 2:27:54 PM