B
NOTE
This refrigerator needs to be installed independently
and cannot be used as a built-in. Otherwise, it will cause
problems such as failure to install into the cabinet, the
performance and life of the product are reduced. And the
manufacturer does not provide basic product warranty.
Energy saving tips
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool down to room temperature before placing it in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freezes too slowly may
lose quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
•
Appliance storage bins should not be lined with tin foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
•
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible
Changing the light
•
This product contains a light source of energy efficiency class G.
•
Light source in this product can only be replaced by qualified professionals.
•
Please contact after-sales service if the light source fails.
•
The light source shall be removed at the end of the product's useful life, with sorting and
recycling done separately.
Using the appliance
7
EN