Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
FITTING INSTRUCTIONS FOR FP0103BK FORK PROTECTORS
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF MOUNTING TO THE BIKE
•
Place the larger spacer into the RHS of the front wheel spindle.
•
Push bar through the hollow spindle
•
Place the smaller spacer into the LHS of the front wheel spindle
•
Place black bobbins on each end of spindle bar
•
Fit washer and nut loosely onto each end of the bar
•
With a socket on either end, tighten until the assembly locks into place
•
Do not overtighten – the nyloc nuts will hold it tight.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
DUCATI DIAVEL 2011
R&G Racing
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
Manuels Connexes pour R&G FP0103BK
Sommaire des Matières pour R&G FP0103BK
- Page 1 FITTING INSTRUCTIONS FOR FP0103BK FORK PROTECTORS DUCATI DIAVEL 2011 LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF MOUNTING TO THE BIKE • Place the larger spacer into the RHS of the front wheel spindle.
- Page 2 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 3 FRANCE INSTRUCTIONS DE MONTAGE DE LA PROTECTION FP0103BK DUCATI DIAVEL 2011 Merci de noter que les pièces assemblées dans l’emballage ne sont pas nécessairement dans le sens du montage à réaliser sur la moto. • Placez l’entretoise la plus large dans le côté droit de l’axe de fourche.