Publicité
Vehicle Vin must be updated with the sales code of the added accessory in order to enable
system functionality. Using the DealerCONNECT website and a StarSCAN diagonstic tool,
complete the procedure below:
• Log on to https://dealerconnect.chrysler.com
• In the "Vehicle Option" screen under the "Global Claims System" category in the "Service"
tab, enter vehicle VIN and add sales code(s) noted below as a "Dealer Installed Option".
FOR 2007-2008 MY VEHICLE
(XRV) (I & II)
(RDJ) (I & II)
(RD9) (II Only)
(RF5) (II Only)
• Confirm that the new sales code has been successfully added to the VIN.
• With the StarSCAN diagnostic tool connected to both the internet (via Ethernet port
or wireless connection) and the vehicle, follow the steps below:
IN THE INITIAL START UP SCREEN
• PRESS------------
• TOGGLE DOWN AND HIGHLIGHT----RESTORE VEHICLE CONFIGURATION
START
• PRESS-------START
• PRESS-------NEXT>
NEXT>
• IF NECESSARY, SELECT PROPER VEHICLE LINE AND MODEL YEAR AND PRESS---NEXT>
• CONFRIM CORRECT SELECTION AND PRESS---NEXT>
• ENTER VEHICLE VIN USING ON -SCREEN KEYBOARD OR CONFIRM THAT AUTO-FILLED
VIN PLATE AND PRESS-----NEXT>
• PRESS---------OK
OK
• ENTER USER ID, PASSWORD AND DEALER CODE USING ON-SCREEN
KEYBOARD AND PRESS-------OK
• WAIT FOR VEHICLE CONFIGURATON DATA TO BE DOWNLOADED AND THEN PRESS-- NEXT>
• PRESS------NEXT
NEXT>
• CONFIRM THAT VEHICLE CONFIGURATION HAS BEEN PROGRAMMED SUCCESSFULLY
• NOTE ON-SCREEN INSTRUCTIONS AND PRESS--------FINISH
63
7-25-2008
VEHICLE PREPARATION
RESTORE VEHICLE CONFIGURATION
NEXT>
OK
FOR 2009 MY VEHICLE
(RD9) (II Only)
(RF2) (I & II)
(RF1) (II Only, w/o Swivel Screen)
(
) (II Only, ONLY ADD WHEN EQUIPPED
RD1
WITH 3rd Row Swivel Screen)
NEXT>
FINISH
19 of 28
NEXT>
NEXT>
K6860331
Publicité
