Ocilion IPTV Technologies P480 Hybrid CM Manuel D'utilisation page 39

6.3.3 Automatic code search
The automatic code search can take several minutes. Therefore use this
method only if none of the other methods worked.
The automatic code search, searches through the TV codes for ALL TV brands.
1. Switch on your TV set
2. Press and hold down the
seconds.
The red LED is lit.
3. Press the
If the TV set is switched off, the TV code is correct. Switch the TV set back
on and try out other buttons to see if they work correctly.
If the TV does not respond to the command, repeat step 3 until the TV is
switched off or the other buttons work correctly.
Pressing the
4. Press the
The red LED flashes twice in quick succession.
6.4 Controlling the TV
Which remote control buttons are compatible with your TV depends on the
buttons of the original remote control for your TV.
After programming a valid code, you can control your TV set. Press and hold the
button, and then press the desired button to control your TV set.
and
button, and then the
button terminates programming without saving.
button to confirm the TV code.
buttons simultaneously for at least 3
button.
P480 Hybrid CM | 15