Publicité
Les langues disponibles
Les langues disponibles
6.2 Changing the operating mode
The remote control is in Bluetooth mode on delivery. To change the operating
mode, proceed as follows:
1. Press and hold down the
3 seconds.
The green LED on the remote control lights up.
2. Enter the code you want (see Table 1).
The green LED on the remote control briefly flashes twice.
The selected operating mode is now active. You can change the operating mode
in the same way at any time. For instructions to reset the remote control to
factory defaults, see the section "Resetting the remote control" on page .
Operating mode
Bluetooth (default)
Infrared
Table 1: Operating modes
6.3 Programming the TV set
The remote control may not be compatible with your TV set.
Note the specifications for the respective programming type. If you deviate
from them or do not press a button for 15 seconds, the programming
process is cancelled. This is shown by the green LED flashing once.
The remote control has an integrated database with TV codes for numerous
brands. Depending on the brand of your TV set, you can program a TV code in
different ways:
Manual programming: you need to enter the TV code manually.
Brand code search: you can search for the desired TV code within a brand.
Automatic code search: you can search the entire TV database for a suitable
TV code.
12 | P480 Hybrid CM
and
buttons simultaneously for at least
Description
Controls the set-top box in Bluetooth mode.
The remote control must be paired with the
set-top box for this.
Controls the set-top box in infrared mode.
Code
1
2
Publicité
