Publicité
Les langues disponibles
Les langues disponibles
Keypad
Timer
(Clock Hold
3 Sec)
Timer
(Clock Hold
3 Sec)
Start
(Add 30 sec)
Start
(Add 30 sec)
Stop
(Unlock)
Stop
(Unlock)
10
Keypad Instructions
Feature
Hold to Set the Clock
Set Kitchen Timer
Add 30 Seconds
Start Function
Microwave Pause/Stop
Function
2-Step Door Opening
Instructions
To set the clock, follow the instructions below:
1. Press Timer for 3 seconds to enter clock setting.
2. Press the "+/-" button to set the hour, press the Start button to confirm.
3. Press the "+/-" button to set the minute.
4. Press Start button.
NOTE: The microwave oven must be in standby. It will also appear every
time the product is plugged in. The screen shows "12 Hr" ( "12" flashing),
use "+/-" to change 12 or 24 hour format, press Start to confirm; then the
screen shows "12:00".
The kitchen timer functions like a stop watch. To set the kitchen timer,
following the instructions below:
1. Press Timer button.
2. Press "+/-" button to enter desired time.
3. Press Start button.
NOTE: While the Timer countdown is active in the display, touch
Stop/Unlock to stop the Timer. The timer does not start or stop the
microwave oven.
The button Start can be used in two ways:
1. To start the microwave by cooking for 30 seconds with full power in
standby mode.
2. To increase a cooking time using increments of 30 seconds. Each press
adds 30 seconds.
Press the Start button to start any cooking function. If cooking is
interrupted by opening the door, touch the Start button after the door is
closed again to resume the cycle.
The Stop/Unlock button stops any microwave oven function except for the
clock.
The microwave oven will also turn off when the door is opened. When the
door is opened, the element(s) will turn off, but the microwave oven light
will remain on. Close the door and touch the Start button to resume the
preset cycle.
This microwave comes with the added feature of a 2-step door opening
functionality to avoid unintended access.
The Stop/Unlock button can be used to pause/cancel the function during or
after cook time.
The Stop/Unlock button can be used for 2-step door opening:
1. Once you set the cooking time and press the Start button, the Door
Lock icon will appear on the display.
2. To open the microwave:
Press Stop (Unlock).
■
Press door release button.
■
NOTE: Once you press the Stop/Unlock button to stop/pause any function,
the Door Lock icon will disappear for 10 seconds and you will be able to
press the door release button to open the door. The Door Lock icon will
reappear after 10 seconds and require you to repeat steps 1 and 2 to open
the door.
NOTE: When the machine is powered on after plug-in, the 2-Step Door
function will not be triggered. If a cooking cycle starts after the door closes,
then 2 steps are required to open the door. Once the 2 steps have been
used to open the door, if the door closes and no cooking power is applied,
then you can open the door by just pressing the door release button.
Publicité
