located on the identification plate on the casing. EWH serial number consists of thirteen
digits. The third and fourth digits of the serial number are year of manufacture, the fifth
and sixth digits - month of release, the seventh and eighth digits - day of EWH release.
Claims within the warranty period are accepted only on presentation of the guarantee
card with marks of the seller, and the identification plate on the casing of the EWH.
The warranty shall apply to EWH only. Responsibility for compliance with prin-
ciples of installation and connection shall be borne by the buyer (in case of connection
by his own) or by the installer carrying out connection.
The first replacement of the magnesium anode shall be made no later than 12
months from the date of EWH installation. In case of no mark of installation in warranty
certificate with the seal of installation company, the period is calculated from the date
of purchase. Regular periodic maintenance and annual replacement of the magnesium
anode in time is imperative to maintain the manufacturer's warranty. Replacement of
the anode must be accompanied by a mark in the warranty card in case of replacement
by a service organization, or an attached sales receipt for its purchase in case of replace-
ment by the owner.
The manufacturer shall not be liable for defects due to violations of principles of
installation, operation and maintenance of EWH set forth herein, including in cases
where these defects have arisen due to invalid parameters of mains (electricity and wa-
ter), where EWH is operated, and due to the intervention of a third party. Manufacturer's
warranty does not cover claims for appearance of EWH.
16.
Manufacturer:
Guangdong New Weber Electric Appliances Co., Ltd.
1st Floor, Building B, No.15, Jianye Middle Road, Shunde High-tech Industrial Zone
(Ronggui), Huakou, Ronggui, Shunde, Foshan city, Guangdong Province, China.
All models have been certified and comply with requirements of European Directives:
2014/35/EU, 2014/30/EU and 2011/65/EU (RoHS).
INFORMATION ON THE MANUFACTURER
EN
ы
11