Hilti TE 700-AVR Notice Originale page 22

Earth rod rammer
en
4. Technical data
Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the power tool's type identification plate
for details of its voltage, current and input power ratings.
Rated
voltage, 100 V
TE 700‑AVR
Rated 1,300 W
power
input
Rated cur- 13 A
rent input
Mains 50...60 Hz
frequency
Power tool
Weight in accordance with EPTA procedure
01/2003
Dimensions (L x W x H)
Single impact energy in accordance with EPTA pro-
cedure 05/2009
Chuck
Hammering frequency under load
Information about the power tool and its applications
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardized test given in EN 60745 and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure. The declared vibration emission level represents the main applications
of the tool. However if the tool is used for different applications, with different accessories, or is poorly
maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period. An estimation of the level of exposure to vibration should also take into account the times when
the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintaining the tool and the accessories, keeping hands warm, organization
of work patterns.
22
TE‑Y chuck /
tool descrip- Width (mm)
tion
TP‑TKS ⁵⁄₈"
TP‑TKS ³⁄₄"
110 V 110 V 110‑127
1,300 W 1,300 W 1,300 W
‑
11.8 A 11.8 A
50 Hz 60 Hz 50...60 Hz
TE 700‑AVR
7.9 kg
564 mm x 125 mm x 248 mm
11.5 J
TE‑Y
46 Hz
Protection class II (double insulated)
Width in
Length (mm)
inches
Inside Ø ⁵⁄₈
Inside Ø ³⁄₄
220 V 230 V
1,300 W 1,300 W
9.8 A 9.5 A
50...60 Hz 50...60 Hz
Length in
inches
240 V
1,300 W
9.0 A
50 Hz