Hilti TE 700-AVR Notice Originale page 18

Obligation signs
Wear eye Wear a hard
protection hat
en
Wear Wear safety
breathing shoes
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Volts Amps
Double Lock symbol
insulated
2. Description
2.1 Use of the product as directed
The power tool is an electrically-powered breaker with pneumatic hammer mechanism for medium heavy
chiseling work.
The power tool is designed for removing and breaking up concrete, masonry and stone.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Nationally applicable industrial safety regulations must be observed.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
18
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Wear ear Wear
Hilti representative or service department.
protection protective
gloves
Type:
Generation: 01
Serial no.:
Chiseling Chisel position
adjustment
Alternating Hertz
current
Equipped with
theft
protection
system