Bosch GCA30-42K Consignes D'utilisation/De Sécurité page 14

Establishing Connection
1. Ensure that the Auto-Start Remote 5 is within range of the Receiver 1.
2. Insert the plug of the dust extractor into the primary power source.
3. Set the switch of the dust extractor to Power Tool Activation Mode
(Fig. 4).
4. Insert the Plug 4 of the Receiver 1 into the plug socket on the dust ex-
tractor. Pairing mode will begin automatically. The Status Indicator with
Auto-Start Symbol 2 will flash blue (Fig. 5).
5. Press the Start/Stop Button 7 on the Auto-Start Remote 5 until the LED
Status Indicator 6 flashes blue twice. The LED Status Indicator 6 on the
Auto-Start Remote 5 will briefly flash blue (Fig. 6).
Fig. 4
14
160992A8R3 GCA30-42K 202404.indd 14
Operation
4/1/24 3:45 PM