Samsung Micro Led MNA76MS1CAC Manuel D'utilisation page 4

Providing proper ventilation for your MICRO LED
When you install your MICRO LED and One Connect Box,
maintain a distance of at least 10 cm between the MICRO LED,
One Connect Box, and other objects (walls, cabinet sides, etc.) to
ensure proper ventilation. Failing to maintain proper ventilation
may result in a fire or a problem with the product caused by an
increase in its internal temperature.
• When you install your MICRO LED with a wall mount, we
strongly recommend you use parts provided by Samsung only.
Using parts provided by another manufacturer may cause
difficulties with the product or result in injury caused by the
product falling.
Operation
• This apparatus uses batteries. In your community, there might
be environmental regulations that require you to dispose of
these batteries properly. Please contact your local authorities
for disposal or recycling information.
• Store the accessories (remote control, or etc.) in a location
safely out of the reach of children.
• Do not drop or strike the product. If the product is damaged,
disconnect the power cord and contact a Samsung service
centre.
• Do not dispose of remote control or batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• CAUTION: There is danger of an explosion if you replace the
batteries used in the remote with the wrong type of battery.
Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF
FIRE, KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
Caring for the MICRO LED
• To clean this apparatus, unplug the power cord from the wall
outlet and wipe the product with a soft, dry cloth. Do not
use any chemicals such as wax, benzene, alcohol, thinners,
insecticide, aerial fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the MICRO LED or
erase the printing on the product.
• The exterior and screen of the MICRO LED can get scratched
during cleaning. Be sure to wipe the exterior and screen
carefully using a soft cloth to prevent scratches.
• Do not spray water or any liquid directly onto the MICRO LED.
Any liquid that goes into the product may cause a failure, fire,
or electric shock.
English - 4
01 What's in the Box?
Make sure the following items are included with your MICRO LED.
If any items are missing, contact your dealer.
• Samsung Smart Remote
• User Manual
• Warranty Card / Regulatory Guide (Not available in some
locations)
• MICRO LED Power Cord
• IR Cable x 4
• One Connect Box
• One Connect Power Cord
• One Connect Cable
• One Connect Cable Gender
• The provided cables may differ depending on the country. Be
sure to use the power cord that is suitable for your region.
• The items' colours and shapes may vary depending on the
models.
• Cables not included can be purchased separately.
• Check for any accessories hidden behind or in the packing
materials when opening the box.
Warning: Screens can be damaged from direct
pressure when handled incorrectly. As shown
in the figure, make sure to grip the edges of the
screen when you lift the MICRO LED.
Do Not Touch
This Screen!